Relay with that pump.
Guns and cars have many things in common, but one similarity stands out among the rest: the best ones are manual. This two-for-one release special is the perfect getaway from gas operation for those who prefer a simpler, more hands-on approach.
Brought to us by SwarmTech Design, 3DArms, and Middleton Made, a triple play of powerhouse AWCY? devs, these twin rifles make no compromises and take no prisoners.
Technical Specs
The files are designed to accommodate PLA+ as a minimum, though documentation supplied by the devs also recommends filled nylons. Durability may vary depending on selected printing materials. Documentation also recommends specific print settings.
The designs include not only printed lowers, but also printed uppers and bolt carriers, and are rated for all major AR calibers (5.56, 7.62×39, 300BLK, .458 SOCOM, etc.), making them incredibly versatile builds.
The designs are meant to support standard AR-15 lower parts kits.
Parts List
Components
- AR-15 BCG (minus carrier)
- AR-15 barrel
- AR-15 lower parts kit
- AR-15 low profile gas block (see documentation for more details)
- Glock 17 recoil spring
Hardware
- 3 – 36″ 8-32 threaded rods
- 8 – 8-32 nuts
- 3 – M4 x 25mm socket head bolts + nuts
- Blue + Red Loctite
Tools
- Wrench / Pliers
- Allen/hex key set
- Dremel / hacksaw
- SAE drill bit set
In The Wild
Photos
Videos
The Monarch and Apple Pie are the perfect releases for no-frills builders of any skill level. Download and build them today!
Is something missing or incorrect?
