Anarchy 37mm Launcher Details
Introducing The Anarchy, a small 37mm launcher that is highly efficient and affordable.
The Anarchy was developed with 3 versions, the Hand Cannon, the Under barrel and the Double Door Knocker.
Check out some of the other 3D Printed launchers
The design was originally created by Danny Meatball and was later developed by Atticus, who extended the frame and implemented the “flip to side” design.
The project was then handed over to the current owner, Unseenkiller, who oversaw its completion with the help of a few others at AWCY and in the 3D Gun community.
Anarchy 37mm Launcher in the Wild
Photos
Videos
As promised, it released on Monday. ????
— unseenkiller (@unseenkiller1) July 3, 2023
Visit https://t.co/cUTPCS5kf9 today to get started on yours! ???????? pic.twitter.com/52pADPTEkA
Now we're cooking with the 37mm launcher from @unseenkiller1 pic.twitter.com/kpcVWeHU4y
— Mr.Snow.Makes (@mrsnow_makes) July 3, 2023
Anarchy 37mm Launcher Tech Specs
The Anarchy 37mm launcher has been tested with over 280 rounds of 37mm projectiles and is recommended to use between 15gr and 35gr of Black Powder for maximum enjoyment and longevity.
It is important to note that safety should always be a top priority and hotter loads are not recommended.
Required Parts for the Anarchy 37mm Launcher
Prerequisites
- Filament
- 3D Printer
- 1x Ender Bed Spring
- 2x if building Double Door Knocker
- DevCon Epoxy (adhering barrel to sleeve)
- 1x AR-15 Hammer Spring (Extra Power for MILC rounds)
- 2x if building Double Door Knocker
- 1x AR-15 Buffer Detent Spring
- 2x if building Double Door Knocker
- Optional: 1x/2x Seamless Barrel
- Optional: 1x/2x Fence Post Barrel
Hardware
- 1x 5/16″x3.5″ Adjustable Clevis Pin: Part # 98330A190
- 2x if building Double Door Knocker
- 3x M3x25 SHCS (trigger, hammer butt plug)
- 6x if building Double Door Knocker
- 2x M3x16 SHCS (Firing Pin, Trigger Shoe)
- 2x if building Double Door Knocker
- 1x M3x20 SHCS (barrel sleeve)
- 2x if building Double Door Knocker
- 1x M3x35 SHCS (barrel release carriage)
- 2x if building Double Door Knocker
- 6x M3 Nuts
- 12x if building Double Door Knocker
- Rhino Barrel (Part # 7767T52) – Cut down to 6โ or desired length
- 2x if building Double Door Knocker
Tools
- Hammer
- Drill
- Power Drill
- Punch Set Armorer
Suggested 3D Printed The Anarchy Settings
| Setting | Value |
|---|---|
| Nozzle | 0.4 mm |
| Layer Height | 0.2 mm |
| Wall Count | 8 min |
| Temperature | Highest Possible |
| Infill Density | 100% |
| Supports | On / Everywhere |
| Support Type | Tree |
| Cooling Fan | 25% |
| Bed Adhesion | Chosen |
Filament
Any of the below filament types will work for 3D printing the Anarchy launcher:
- PLA+
- PLA Pro
Looking to strap a launcher under your AR15? Need to clear rooms with a thump? Maybe you are just trying to relive the COD glory days with your very own noob tube.
The Anarchy 37mm launcher is the 3D gun for you!
Is something missing or incorrect?
