Nameless Launcher

nameless launcher 26 5 (1)

Nameless Launcher STL Files

Compact & double-action single shot 26.5mm launcher

DMB & Co. Nameless Details

Not satisfied by the success of his previous launchers, nor deterred by the relative lack of support for 26.5mm projects, DannyMeatball & Company has left no doubt in anyone’s mind about who the king of this town is. Having literally written the book on 26.5mm launchers with his comrades at AWCY?, DMB & Co. doesn’t even need to give this release a name for it to steal the spotlight, so it will remain Nameless.

Of course, as with any launcher, 3DGunBuilder recommends exercising extreme caution when beginning this project, as it requires handling dangerous materials, especially if you’re planning on making your own signals to launch. Keep all your fingers, life’s more fun that way.

Author’s Note: The Nameless is now also available in 37mm. Check it out here!

DMB & Co. Nameless In The Wild


Render 1


DMB & Co. Nameless Tech Specs

The files are designed to accommodate PLA+ as a minimum, but documentation recommends carbon fiber nylon for best results. Documentation also recommends specific print settings. Durability may vary depending on selected printing materials and print settings.

The design has two variants, the Regular and the Short, with both standalone and under-slung setups supported. Both variants are double-action and single-shot.

Parts are almost entirely hardware, with the only firearm component being an AK recoil spring that can be replaced by an equivalent spring, meaning this release can be considered Full-DIY.

Required Parts for DMB & Co. Nameless


  • Filament
  • 3D Printer


  • 3 – 1/4″ threaded rods (290mm/235mm, 190mm/135mm) + nuts
  • 2 – M5 x 30mm bolts +nuts
  • 1 – M3 x 20mm bolt + nut
  • 4 – M3 rods (23mm, 45mm, 75mm)
  • 1 – M6 rod (115mm)
  • 1 – 8 x 25mm spring
  • 2 – 5 x 35mm spring
  • 1 – 5 x 15mm spring
  • 1 – AK recoil spring (see documentation for more details)
  • 1 – 1″ EMT (150mm/100mm)


  • Punch set
  • Armorer’s hammer
  • Allen/hex key set

DMB & Co. Nameless Build Instructions

The Nameless Launcher from DMB & Co. is an exciting addition to the launcher club that is definitely worth the hype.

Wanna get in on the signaling craze? There are some crazy launcher options out there these days. Download and build one today!

Is something missing or incorrect?

DISCLAIMER: 3D STL files are for learning and documentation purposes only. The users of this website and files need to be aware of all applicable local, state, federal and regional laws. 3D Gun Builder does not encourage, condone, or promote any illegal activity.

3D Gun Builder ( does not host, provide, develop, and/or have any affiliation with the firearm STL files or All files are hosted by a third party.

Kem Regik
Latest posts by Kem Regik (see all)
3D Gun Files

Download over 100+ STLs


Learn 3D Gun Printing

Polymer 80

80% Guides & Tips

Industry News

Stay Up to Date

Suggest an Edit

If you see something incorrect or that we missed within this file, please let us know and we will fix it as soon as possible