Because Lighting Fireworks the Normal Way is Boring
Who knew anti-tank launchers could be so much fun at parties? The RPG-SK-75-FE is probably the most impressive and most American way to celebrate any special occasion, bar none. This shoulder-fired firework launcher is brought to us by Iprintshit and Nofsky Industries, names that carry significant weight in the community for off-the-wall builds of all kinds.
Of course, as with any launcher, 3DGunBuilder recommends exercising extreme caution when beginning this project, as it requires handling dangerous materials. The stuff fireworks are made off are no joke and should be handled only by those who know what they’re doing.
3DGunBuilder is not responsible for any extremities injured or lost through negligence and general stupidity. Don’t be That Guy™.
In The Wild
Photos
Videos
RPG-SK-75-FE Technical Specs
The files are designed to accommodate PLA+ as a minimum. Durability may vary depending on selected print settings and printing materials.
The design requires that the donor RPG-SK-75 trainer be torn apart and reconfigured. Some trainers are “deactivated’ or otherwise rendered inert in some semi-permanent manner, and considerations should be taken when selecting the correct donor for this project.
The completed launcher is compatible with 2-inch style firework mortars, which are fairly common in most places.
Included in the package are also files to make a storage container for extra fireworks.
RPG-SK-75-FE Parts List
Components
- RPG-SK-75
- 2-inch mortar style fireworks
- 209 primers
- Hodgdon Pyrodex P black powder
Tools
- JB Weld or other epoxy adhesive
- 2 inch castle wrench or channel locks
- Rubber wrench
- Needle-nose pliers
- Drill/Drill press and ¼” bit
- Exacto/Utility knife
- Scotch tape
- Vice grips
- Sandpaper
- File
- Saw
- Grease, oil, or other lubricant
RPG-SK-75-FE Build Instructions
The RPG-SK-75-FE is the best way to improve any celebration, no matter the occasion. Download and build one today!
Is something missing or incorrect?
